Guide to power

From HaloStation Wiki
Revision as of 17:59, 13 November 2019 by Cdr Riley (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

MARK 2 Hanley Messer Deuterium Fusion Drive guide

NAVLOGCOM Provides the basic Steps for the Marine on how to safely start up a a standertd UNSC Ship/station Reactor


MH2 -1.png


heres a picture of the hole setup from the UNSC bertels it contains the Henley Messer fusion reactor and its connected Air coolers

the middle block is the fusion reactor while the 3 yellow boxes are the reactor Coolers

MH2 -2.png


How to use reactor: step one: turn on coolers and set up to like 50kpa

MH2 -3.png

step two: grab a fuel pack from the creates and place it in the fusion reactor (you can place it in an empty reactor via left clicking it with fuel pack in hand)

MH2 -4.png


this a reactor with fuel pack

MH2 -5.png

when you left click on the Reactor/drive your gonna see this interface

MH2 -6.png


congrats your making power now

for you ship or base you can modify the rate of fusion depending on how much energy you need, if you want to know the best setting for the reactors , ask some from your fraction or on the discord, usually if you set too 0.3 fusion rate it will last the round easily without blowing up